Installation For Norfolk Cars

Being able to offer a wide range of services is a great way to run any business, but especially a garage. To do this, you’ll need a variety of different equipment that will not only ensure you’re offering a vast amount of services but also ensures your company is running smoothly.

 

If you want to find out everything there is on the vehicle lifts we recently installed in Norfolk, keep reading!

The Install

 

Gemcal are pleased to announce that our fully qualified garage equipment engineers have completed the installation of a 4 Tonne Electric Release 2 Post Lift for a garage in Kings Lynn, Norfolk. 

 

We were able to install this product in just one day which the customer was very happy with! 

 

Gemcal were appointed by a garage equipment supplier who had supplied and delivered the equipment but needed our assistance with a professional installation service

 

We’ve worked with this garage equipment supplier various times, installing a huge range of garage equipment. Including not only vehicle lifts like this but also other equipment such as MOT Bays, Brake Testers, Tyre Equipment and much more. 

 

We are incredibly unique in being able to offer installation of any type of workshop equipment no matter what the brand is!

 

If you’re looking for a fantastic company that can install any kind of garage equipment, give us a call at 0203 507 1675.

 

A&T Auto Services Receive Speedy Install

A&T Auto Services Receive Speedy Install

A&T Auto Services Receive Speedy Install

A&T Motor Services located in Shrewsbury offer a wide variety of services including MOTs, servicing, vehicle as well as new and used car sales – all at competitive prices. 

The garage prides itself in its knowledgeable mechanics who bring their experience into every vehicle diagnosis and repair job that comes through their doors.

SASA Auto Repairs Install

The workshop required a new post service lift and was looking for a company that could offer a professional and speedy installation at an affordable price!

GEMCAL was appointed the installation contract of a VGE-F50 5 Tonne, 4 post service lift for A&T Motor Services. This was a fantastic installation that both met the professionalism and speedy installation that the garage was looking for. We performed a professional installation along with on-site training to make sure the workshop team knew how to operate the new equipment both safely and correctly.

Our engineers have demonstrated time and time again that Gemcal can install any workshop equipment on the market.

So, wherever you decide to purchase your new equipment from, be confident that our qualified engineers can carry out the installation all over the UK.

Want to find out more? Get in-touch for a discussion on how Gemcal can support your installation requirements.

Or to request a quote follow the link below:
www.gemcal.co.uk/get-a-quote

Call: 0203 507 1675

Email: info@gemcal.co.uk

manual headlamp aligner

2T manual jacking beam

2T manual jacking beam

2T manual jacking beam

manual headlamp aligner

2T manual jacking beam

2T manual jacking beam

2T manual jacking beam

manual headlamp aligner

2T manual jacking beam

2T manual jacking beam

2T manual jacking beam

manual headlamp aligner

2T manual jacking beam

2T manual jacking beam

2T manual jacking beam

manual headlamp aligner

2T manual jacking beam

2T manual jacking beam

2T manual jacking beam

manual headlamp aligner

2T manual jacking beam

steve autos improves the efficiency of under vehicle repairs with a new lift

Steve Autos improves the efficiency of ‘under vehicle’ repairs with a new lift

Steve Autos improves the efficiency of ‘under vehicle’ repairs with a new lift

With the need to ensure that vehicle underbelly repairs were being carried out efficiently and safely, whilst saving vital space, Steve Autos contacted Gemcal who collaboratively alongside Garage Equipment supplier V-Tech to install new a 2-post lift.

Gemcal van with post lifts

 

Steve Autos improves the efficiency of 'under vehicle' repairs with a new lift

Company Background:

Steve Autos Ltd, based in Croydon South London was established in 2015 and is an automotive vehicle repair workshop that deals with all types of vehicle maintenance such as MOT, body repairs, engine works and other general repairs.

Issue:

  1. Workshop space is limited.
  2. Vehicle underbelly repairs are taking longer due to vehicle
    lift prep time.

Solution:

Steve Autos needed to ensure that vehicle underbelly repairs were being carried out efficiently and safely, whilst ensuring that the garage maximised the working space as best as possible. They contacted Gemcal, who collaboratively alongside Garage Equipment supplier V-Tech installed the 2-post lift.

V-Tech performed a professional installation along with on-site training to make sure the workshop team knew how to operate the new equipment safely and correctly.

Business Benefits:

The team of mechanics at Steve Autos can now easily reach any part of their vehicle underbellies. The new car lift has also increased space ensuring this workshop is maximising space.

  • Faster 'lifting' speed for quicker vehicle repairs
  • Quality approved lifts ensuring workshop safety standards
  • Team training to ensure maximum safe workshop use

The customer was pleased with the service that Gemcal provided and the quality of the equipment provided by V-Tech.

Gemcal Van with 4 Post Lifts

Gemcal Van with Brake Tester

How can we help you?

Garages rely on our nationwide team of garage equipment engineers to assist with a variety of different services, including the installation of any equipment.

In addition, we also help workshops that need help with MOT Bay management, equipment breakdowns, equipment calibrations, or preventative maintenance.

If you are interested in any of our garage equipment services, please feel free to contact our team.

Steve Autos improve efficiency of ‘under vehicle’ repairs with a new lift 20.7.22

Steve Autos improves the efficiency of 'under vehicle' repairs with a new lift

With the need to ensure that vehicle underbelly repairs were being carried out efficiently and safely, whilst saving vital space, Steve Autos contacted Gemcal who collaboratively alongside Garage Equipment supplier V-Tech to install new a 2-post lift.

 

Steve Autos improves the efficiency of ‘under vehicle’ repairs with a new lift

Company Background:

Steve Autos Ltd, based in Croydon South London was established in 2015 and is an automotive vehicle repair workshop that deals with all types of vehicle maintenance such as MOT, body repairs, engine works and other general repairs.

Issue:

  1. Workshop space is limited.
  2. Vehicle underbelly repairs are taking longer due to vehicle
    lift prep time.

Solution:

Steve Autos needed to ensure that vehicle underbelly repairs were being carried out efficiently and safely, whilst ensuring that the garage maximised the working space as best as possible. They contacted Gemcal, who collaboratively alongside Garage Equipment supplier V-Tech installed the 2-post lift.

V-Tech performed a professional installation along with on-site training to make sure the workshop team knew how to operate the new equipment safely and correctly.

Business Benefits:

The team of mechanics at Steve Autos can now easily reach any part of their vehicle underbellies. The new car lift has also increased space ensuring this workshop is maximising space.

  • Faster ‘lifting’ speed for quicker vehicle repairs
  • Quality approved lifts ensuring workshop safety standards
  • Team training to ensure maximum safe workshop use

The customer was pleased with the service that Gemcal provided and the quality of the equipment provided by V-Tech.

How can we help you?

Garages rely on our nationwide team of garage equipment engineers to assist with a variety of different services, including the installation of any equipment.

In addition, we also help workshops that need help with MOT Bay management, equipment breakdowns, equipment calibrations, or preventative maintenance.

If you are interested in any of our garage equipment services, please feel free to contact our team.

GEMCAL NEW BLOG

GEMCAL NEW BLOG

Gemcal - Blog

brake-tester-measurements.jpg

Client: Replace text with client name

Location: Replace text with location

Product: Replace text with product e.g. ATL Bay

Client: AJ Automedics Vehicle Services

Location: Durham

Product: BM4010 Brake Tester

The BM20200 comes with a full TUV and GEA approval for ATL and ATF bays. This is an ideal option for commercial workshops or mobile testers alike. The unit when set up requires only 3.5 meters in total length to deploy the on/off ramps and a 4.5 meter clearance in width. It can be set up on a range of surfaces, tarmac, concrete or uneven surfaces for example gravel, sand, dirt or even snow.

Providing more flexibility than the in-ground tester and without any need for civil work the 20200 can easily be deployed, moved or set up by a single engineer in only 10 minutes

the unit comes with BM’s flex check software which is a PC based programme ready loaded with a DVS database for reference however this also stores your own results to extend these reference capabilities.

Flex check can also be integrated with a smart phone or a tablet which communicates wireless with the main PC unit which then allows a single operator to run an entire test without having to leave the area of the vehicle being tested.

V-Tech engineers are trained by BM in their Denmark HQ to cover all aspects of garage equipment installations and maintaining their machines which makes us the primary BM supplier in the UK.

The 20200 is initially a simple kit to set up. Its is more or less plug and play.

We always double check our units and take our time doing so before singing off the installation which covers the electrics, software and calibration of the rollers including an active test with a vehicle to see if it is running fine etc. When the test is running we train the workshop engineers and ensure the whole system is covered for their knowledge including the procedure and any additional questions asked.

If there are any problems or any help needed after the installation we are always on hand and can ensure we can get the garage equipment up and running again with as little down time as possible.

North Norfolk Service Site | MOT Bays
BM20200 Brake Tester Measurements | MOT Bays

More Case Studies

[the-post-grid id="2996" title="Articles – Set of 3 "]
If you have any queries contact our team today on 0208 4981 288 or email info@v-techuk.com 

Installing an RBT for Portman Logistics

Installing an RBT for Portman Logistics

Installing an RBT for Portman Logistics

Portman Logistics provide a first-class container haulage service. With their own fleet of vehicles, they operate across the UK. Gemcal were appointed by V-Tech, the garage Equipment Supplier, to carry out a brake tester installation. The long-established company needed a reliable team for a professional installation of their new BM20200 Commercial Mobile Brake Tester.

Gemcal van with post lifts

Our team of qualified engineers organised the delivery and full installation of the equipment and trained the Portman team on how to exactly use the BM flexCheck software to perform authorised brake testing for their fleet.

Why rely on our engineers?

  • Highly qualified and fully trained
  • Ability to install any type of garage equipment
  • Nationwide engineers
  • Aftercare services available- we’ll take care of the installation from start to finish

Are you looking for a reliable team to install your garage equipment? Or are you looking for workshop equipment maintenance? Contact our team today to enquire.

Call: 0203 507 1675
Email: info@gemcal.co.uk 

Want to request a quote? 

www.gemcal.co.uk/get-a-quote

Gemcal Van with 4 Post Lifts

Gemcal Van with Post lifts

Gemcal Van with Brake Tester

Installing SICAM equipment at Buzzard Tyres

INSTALLING SICAM EQUIPMENT AT BUZZARD TYRES

Installing SICAM equipment at Buzzard Tyres

Buzzard Tyres is a family-run company based in Leighton Buzzard that ensures the best customer service in the area. Recently they have invested in top of the range tyre equipment from SICAM.

This client was on the hunt for new tyre equipment when their old kit needed replacing and came across the high quality, Italian manufacturer, SICAM. They were impressed with the build quality and equipment features but they needed help with installation and training.

SASA Auto Repairs Install

Gemcal were appointed by Tyre Equipment supplier SICAM to assist with the installation of a Sicam Tyre Package EVO 624S and Wheel Balancer SBM V85AE for Buzzard Tyres. Business owner Iain was over the moon with his equipment and the service that Gemcal provided. We performed a professional installation along with on-site training to make sure the workshop team knew how to operate the new equipment safely and correctly.

Our engineers have demonstrated time and time again, that Gemcal can install any workshop equipment on the market. So wherever you decide to purchase your new kit from, be confident that our qualified engineers can carry out the installation all over the U.K.

To request a quote follow the link below: www.gemcal.co.uk/get-a-quote

Call: 0203 507 1675

Email: info@gemcal.co.uk

manual headlamp aligner

2T manual jacking beam

ATL Bay Installation Complete Within 48 Hours!

ATL BAY INSTALLATION COMPLETED WITHIN 48 HOURS!

ATL BAY INSTALLATION COMPLETED WITHIN 48 HOURS

Gemcal Workshop Services were appointed by garage equipment supplier, V-Tech to assist with the install of a full Class 7 ATL Bay at a workshop in Newport.

V-Tech and many other businesses rely on our nationwide team of Garage Equipment Engineers to assist with a variety of different garage equipment services.

Gemcal van with post lifts

From initially being appointed to the job, our Engineers managed to complete the full ATL Bay install in just 48 hours. This meant that the workshop was up and running quickly. It also allowed them to start to increase their workshop revenue by offering customers an MOT service.

The ATL Bay included:

  • Class 7 ATL 4 Post Lift
  • 5T, 6.5m platform including Play Detectors & Radius Plates
  • Class 7 ATL Connected Brake Tester
  • Manual Headlamp Aligner
  • 3T Manual Jacking Beam
  • Opus 40 Gas Analyser & Opus 100 Smoke Meter
  • Trolley with PC Equipment to run Brake Tester and Emissions
  • Software/ ATL Ancillary Pack including Connected Decelerometer

Gemcal is able to fit and install any equipment for your workshop. In addition, we also help workshops that need help with MOT Bay Management, Equipment Breakdowns, Equipment Calibrations or Preventative Maintenance.

If you are interested in any of our garage equipment services, please feel free to contact our team.

Call: 0203 507 0175

Email: info@gemcal.co.uk 

To request a quote follow the link below

www.gemcal.co.uk/get-a-quote

Gemcal Van with 4 Post Lifts

Gemcal Van with Brake Tester

Gemcal Van with Post lifts

Garage Equipment Installation for London Workshop

Garage Equipment Installation for London Workshop

We are pleased to announce that we were recently appointed by a garage equipment supplier to install a range of garage equipment for a workshop in London known as SASA Auto Repairs.
The workshop had invested in a variety of new garage equipment from V-Tech, who appointed us to carry out the full garage equipment installation.

SASA Auto Repairs Install

Our team successfully carried out a full Class 4 ATL Bay installation including the installation of:

  • EV45JC – Class 4 ATL Scissor Lift
  • 4.5T, 4.8m Platform including Play Detectors & Radius Plates
  • BM4010 – Class 4 ATL Connected Brake Tester
  • VT2401/D/UK/R – Manual Headlamp Aligner
  • 542B.04 – 2T Manual Jacking Beam
  • Opus 40 Gas Analyser & Opus 100 Smoke
  • Trolley with PC Equipment to run Brake Tester & Emissions Software
  • ATL Ancillary Pack including Connected Decelerometer. The install only took our team around 36 hours to fully complete, leaving the workshop owner incredibly pleased with the quick turn around time.

The install only took our team around 36 hours to fully complete, leaving the workshop owner incredibly pleased with the quick turn around time.
Are you looking for a Garage Equipment Installer that can install quickly and accurately? Contact our team today to enquire about our services.

Request a quote today on https://gemcal.co.uk/get-a-quote/

Call: 0203 507 1675

Email: info@gemcal.co.uk

manual headlamp aligner

2T manual jacking beam

2T manual jacking beam

Gemcal Complete Brake Tester Installation in 3 Hours!

Gemcal Complete Brake Tester Installation in 3 Hours!

Our Gemcal engineers have recently completed a brake tester installation for S&R Smith & Son in London.

S R Smith HGV on brake tester

S&R Smith & Son has been delivering goods for over 70 years, using their own large fleet of vehicles. Gemcal were appointed by V-Tech, Garage Equipment Supplier to carry out a brake tester installation. The long-established company needed a reliable team for a professional installation of their new BM20200 Commercial Mobile Brake Tester. Our highly qualified engineers managed to complete the installation in just 3 hours, leaving the customer more than satisfied!

Our engineers are able to install any type of garage equipment ranging from Brake Testers to Tyre Equipment MOT Bays and much more. What makes us unique is that we’ve got you covered no matter what the type of equipment, garage or who you’ve bought it from.

Why rely on our engineers?

  • Highly qualified and fully trained

  • Ability to install any type of garage equipment

  • Nationwide engineers

  • Aftercare services available- we’ll take care of the installation from start to finish

Are you looking for a reliable team to install your garage equipment? Contact our team today to enquire.

Call: 0203 507 1675

Email: info@gemcal.co.uk

Want to request a quote? 

Visit gemcal.co.uk/get-a-quote/ 

S R Smith HGV on brake tester

S R Smith HGV on brake tester